W=600mm STbox Series Wall Mounting Cabinets
STbox series Networking Enclosures/Cabinets, provide maximum optimization resulted to an optimum performance in between quality and added value.
While product gives maximum performance on cabling and networking infrastructure, in parallel provides a very respective economy compared to its quality which is based on high technologic fully automated industry.
The 600x450, 600x600 and D:150mm Rear Section Modules possible to integrate to d:450mm preferably and either to d:600mm.
STbox Wall Cabinet series is available in 5 heights from 7U through to 20U, Each cabinet is supplied as standard with a glass front door, mechanically screwed steel rear panel and lift off steel side panels, all of
which are lockable.
The wide product height portfolio meets any U requirement in infrastructure needs.
STbox series have a professional technical but aesthetic look with decorative Aluminium Extruded Housing on the front door; the product range attracts the attention with the mostly environmentally fit and
selected color of RAL 9005 Black, and RAL 7035 Light Grey, with fine wrinkle soft touch paint. Anthracite Grey Decorative ABS (Acrylonitrile Butadiene Styrene) material header Unit with art design on PVC
provides an aesthetic visuality.
The product range allows with 150mm extention module integration where 4 way access is the question for wall applications.
Completely standard and stocked product portfolio, being delivered a single piece assembled product, as shipping configuration the one set: 2pieces 19’’ adjustable equipment mounting rails included.
STbox Series product range with optimal panel mounting size, and a variety range of accessories enclose the whole expectation of users.
Main Profile- Framework- Top/Bottom Cases, ABS Fan Housing:
Multi Folded Automated Bending technology applied corner profile system, provides a heavy duty structure results to high load capacity of: 80 kgs on wall.
Monoblock multi folded top and bottom cases 20 times bended resulted to a very heavy construction, tightly fixed to the framework with fixing hardware , fully modular system generated.
Top case has a ready Forced Ventilation (Fan Module) integration ABS housing. Fan Module installation can be operated either from roof or from internal side of cabinet.
The advantage of this system is, once the Fan Unit needs maintenance or replacement and while the cabinet is carrying integrated active and passive networking devices, than subject to remove some of them to replace the Fan Module Unit.
Startech Cabinet Fan Module Unit access is from roof where no interference with the already installed components inside cabinets. Decorative Anthracite Grey ABS Fan Module integration housing replacement is toolless. Where the Fan Module to be inserted to the ABS Fan Module Housing without any tool.
Top case integrated with a cable entry point with rubber edged sliding mechanism with w:145mmxd:70mm allows proper cabling insertion. The rubber edged mechanism works between 0 to 50mm slide out.
After inserting the cables, the rubber edged mechanism holds and fixes the cables in parallel preventing the cabinet from dust entry.
Top Case, has ventilation slots at sides which provides passive air ventilation via convention. Once the cabinet is not equipped with forced ventilation ( Fan Units ), this ABS Fan Housing also provides passive ventilation via convection.
Top Case and Main Frame junctions are closed with Anthracite Grey PVC application for aesthetical appearance.
Access to enclosure:
Front door is integrated with decorative 2,5mm thickness aluminium extruded frames, full length smoked , shatterproof, antistatic, 4,0mm thickness glass with single point locking barrel lock.
Front door Aluminium extruded frame allows , decorative PVC Stripes charming the attraction, Anthracite Grey for RAL 7035 Light Grey Cabinets and Light Grey for RAL 9005 Black cabinets
Front door openning direction is set right to left, but reversible to left to right at site with removing the hinge system. Hinge System is spring loaded easy operating version, which allows you to remove the whole front door from cabinet in seconds.
Alternative doors ( Curved Glass and Solid Metal) are available for customer selection.
Side Panels are lockable and removable with barrel style lock, Multifolded bending technology with 8 fold bending provides the rigidity. Easy mechanical locking of panel to main frame with snap capture sytem allows easy attachment of panels and easy removal in seconds while installation in process.
Rear Panels are mechanically screwed to main module, which is Multifolded bending technology with 5 fold bending provided the rigidity.
Rear Panel can be used for wall fixing and drilling pattern.
Bottom case and Rear Panel integrated with PVC gland plate.
Once needed gland plate and rubber edged sliding mechanism could be replaced on site 19’’ rails of Startech STbox Series Wall cabinet are with automated silk-screen U numbering, depends on size 1U to 20U, same from top to bottom or bottom to top results to same U height selection. No matter where you have started counting from. 19’’ rails are 4 fold bending surfaces, 1,5mm thickness provides the high load capacities. The 19’’ rails are made of steel with 8-12 micron zinc plating for corrosion resistance. 19’’ rails are adjustable in depth. For easy adjustment purpose, no need to detach the screws, just ease the screws and slide them in
the channels on the top/bottom chasis bends.
All design features provide 3 way access to your enclosure and equipments, easy to reach to enclosure and equipments for all infrastucture installations and maintenance needs.